How to apply race number stickers to your motorcycle

Applying your race number decals correctly is crucial to both their appearance and durability. Follow our step-by-step guide to ensure your decals fit perfectly.

Preparations

Before you start applying the decals, make sure you have the following:\n

  • Cleaning agent and a soft cloth.\n
  • A razor blade or scissors.\n
  • A heat gun for shaping decals on uneven surfaces.\n

Step-by-step guide

  1. Clean the surface: Wash the surface thoroughly and degrease it to remove dirt and oil that may prevent the decal from adhering properly.\n
  2. Dry the surface: Make sure the surface is completely dry before continuing.\n
  3. Position the decal: Place the decal on the surface without removing the backing to test placement.\n
  4. Apply the decal: Start from one edge and gradually press the decal in place, using a plastic card to smooth it out and avoid air bubbles.\n
  5. Attach with heat: Use a heat gun to soften the decal and mold it to the surface. This ensures that it adheres properly and does not come off during competition.\n

Tips for best results

  • Apply the decals in a warm and dry environment for best adhesion.\n
  • Work slowly to avoid mistakes.\n
  • If you get air bubbles, poke small holes in them with a needle and smooth them out.

With the right technology and our high-quality decals, you can be sure that your start numbers look great and last throughout the competition.

Back to blog